• Elegante Sensor Soap Dispenser Tap - Bench Mount
  • Elegante Sensor Soap Dispenser Tap - Bench Mount
  • Elegante Sensor Soap Dispenser Tap - Bench Mount

The Elegante Sensor Soap Dispenser Tap is a bench mounted elegant and efficient automatic foam soap dispenser.

It’s solid brass construction, finished in eye catching polished chrome is suitable to dispense 1.5ml of soap with 100-3500 cP viscosity and with neutral pH. The 1L soap reservoir is translucent for quick level checks.

An anti-drip valve is provided as standard which prevents mess and unnecessary waste. It is possible to adjust the amount of soap delivered at each application to also minimise waste.


Features

  • Chrome plated brass construction
  • Touch-free access for users
  • Refillable 1L soap reservoir
  • Stylishly designed for any décor
  • 0.8 ml foam soap metered dispensing
  • Able to be used with any brand of foaming soap
Colour/Finish Chrome Plated Brass
Soap Type Foam
Dispenses 0.8 ml
Soap Reservoir 1L
Dimensions 190 x 300 x 32 mm
Construction Tap: Chrome Plated Brass Under Counter Soap Reservoir: Molded ABS
Voltage 220 - 240V
Frequency 50-60Hz
Input 1-5W
Current <1A
Phase Single Phase
Protection Class IP35

Write a review

Note: HTML is not translated!
   Bad           Good

Elegante Sensor Soap Dispenser Tap - Bench Mount

  • Product Code:ESSDB
  • Availability:Pre-Order
  • $2,297.70 NZD

Free Shipping

Related Products

Mode Alcohol Foaming Hand Sanitiser 1000ml

Mode Alcohol Foaming Hand Sanitiser 1000ml

Proven to completely inhibit Rotavirus and is effective against the Influenza virus.Mode Foaming Ha..

$44.99 NZD

Monthly Rental - Dyson Airblade Tap Hand Dryer - Short

Monthly Rental - Dyson Airblade Tap Hand Dryer - Short

This pricing is based on a 36 month contract and at the end of each 36 month period the hand dryer w..

$142.13 NZD

Frequently Asked Questions

Force Hand Dryers are very simple to install.

Attach mounting plate to the wall.

Screw the Hand Dryer to the mounting plate.

Plug in the hand dryer to a 3 pin plug (please note: hard wiring is an option, however we recommend using an Electrician).

All other hand dryers including Dyson, Mitsubishi and Xlerator hand dryers will need an electrician to install.

Cost for installation varies based on if electricity is available where the dryer is being installed and if not how hard it is to get electricity to that location

There is very little maintenance involved with hand dryers.

The maintenance is as follows:

  1. Wipe down the machine and keep it clean each time the bathroom gets cleaned.
  2. If the unit has a drip tray then empty this when the unit is cleaned
  3. Change the unit filters as per manufacturer recommendations (varies from ever 6 months to every 5 years based on the unit)
The ideal hand dryer height depends mainly on the age range of your average washroom users, and the type of dryer you’re installing.

Suggested hands-under dryer height relative to age range:
  • Males (adult): 1,170mm
  • Females (adult): 1,120mm
  • Children (ages 4–7): 810mm
  • Children (ages 7–10): 910mm
  • Children (ages 10–13): 1,020mm
  • Children (ages 13–17): 1,120mm
  • Disabled users: 940mm
These measurements are taken from the air nozzle of the dryer to the floor.

Suggested hands-in dryer height relative to age range:
  • Males (adult): 1,050mm
  • Females (adult): 975mm
  • Children (all ages): 875mm
  • Disabled users: 875mm
These measurements are taken from the top of the dryer unit to the floor.

Each warranty is different per manufacturer.

The warranty is as follows:

Dyson: 5 Years warranty
Force: 12 month replacement warranty
Mitsubishi: 12 month warranty
Xlerator: 12 month warranty

Hand dryers often save 95% + on annual paper towel expenditure by removing expense related to purchasing paper towels and disposing of the used paper towel waste, as well as the time involved in re-stocking the dispensers and emptying the used paper towel waste.

Please use our Online Calculator to compare hand dryer vs paper towel costs and savings.

Airblade / jet hand dryers use two high-speed jets / blades of air, which dry both the palm and the back of the hand at the same time using a squeegee type of action.

This action will dry the hands up to five times faster than traditional hand dryers (approximately 6 seconds per dry).

Single blade jet hand dryers are constructed with the same high-speed jet hand dryer technology in a single air jet / blade.

Yes, We have a wide range of lease options to suite your needs. Please contact us for a list of options.

This is a question which is best answered by your accountant.

Leasing is 100% tax deductible.

Purchased Hand Dryers can be deprecated of you asset register.

Need assistance in selecting the correct hand dryer?

Bulk pricing is also available

Talk To Us Now 06 280 4979

Prosan Testimonials